Affiliate Consultant Jerry Eckles
Jerry Eckles - Welding Inspector / QC Coordinator
|
Jerry is a quality-driven professional with over 40 years’ experience in the Oil and Gas industry; 14 years in management and Inspection. He has a results oriented record of accomplishments that increase efficiency and cost controls. Jerry is a strong leader with expertise in safety, quality control, supervising team members and subcontractors, writing project plans, reports, and documentation.
|
Experience
Aug 2019 – March 2020
McDaniel Technical Services, Inc. ARB Midstream. CPWI Lead Welding Inspector / Hydro-Test Inspector
Platteville, Colorado
Fully equipped independent R & D lab offering plastics testing, failure analysis, formulation and product development, technical marketing, and contract R & D services.
• Inspected Main-line and Tie-in Welds.
• Verified Welding Procedures and Compliance in the field.
• Interpreted Contract Welding Specifications, keep a Weld Log and Weld Map drawings of HDD’s and Valve Sets.
• Monitored Hydro Pre-Test of HDD’s and Final Mainline Hydro Test.
• Inspected Field Valve Installations.
• Prepared documentation and drawings for the Final Job Book.
Jan 2019 – Aug 2019
Cleveland Integrity Services, Rocky Mountain Midstream, Senior Welding Inspector / Williams
Brighton, Colorado
• Verified Welding Procedures and Welder Compliance in the field.
• Kept a weld log and weld map, As-build (red line) drawings on HDD’s, Valve Sets and Fabrication.
• Audit Welding NDT Reader Sheets and MTR’s.
• Tested Welders and provided Welder Qualification Data Report in compliance with company specifications.
• Prepared PHMSA documentation and drawings for the Final Job Book.
Jan 2017 – Jan 2019
Quality Check Energy Services, Discovery Midstream, CPWI Welding Inspector / Hydro-Test Inspector / Q C Coordinator
Brighton, Colorado
• Inspect Fabrication and Final Main-line Tie-in Welds.
• Verify Welding Procedures and Compliance in the field. Interpret Contract Welding Specifications, keep a weld log and weld map, red line drawings on Valve Sets and Fabrication.
• Monitor and Approve all Hydro Pre-Test of HDD’s, Fabrication and Final Main-line Hydro-Test. Inspect Field
Valve Installations.
September 2016 – December 2016
Energy Transfer Co. DAPL, Spread 3, Hydro-Test Inspector
Boone, Iowa
• Inspect and Approve all Hydro Pre-Test of HDD’s, Fabrication and Final Main-line Hydro-Test.
• Inspect all Field Valve Installations. Monitor final Tie-in Welds.
• Coordinate Survey and Final Civil Site Work.
July 2016 – August 2016
Energy Transfer Co. DAPL, Spread 1, Hydro-Test Inspector
Litchfield, Illinois
• Inspect and Monitor all HDD’s.
• Monitor and Approve all Mainline and HDD Hydro-Tests.
• Inspect and assist with Lower-in and Backfill and ROW cleanup.
February 2016 – June 2016
Magellan Midstream Partners, L.P., Fort Smith Connector, CPWI Welding Inspector / Hydro-Test Inspector
Fort Smith, Arkansas
• Inspect and Approve all Hydro Pre-Test of HDD’s, Fabrication and Final Main-line Hydro-Test.
• Inspect all Field Bending.
• Monitor Lowering-in, Tie-Ins, Back-Fill.
June 2015 – February 2016
Suncor Energy, Rocky Mountain Crude System Expansion, CPWI Welding Inspector
Ft. Lupton, Colorado
• Test Welders and provide Welder Qualification Data Report in compliance with company specifications.
• Verify Welding Procedures and Compliance in the field.
• Interpret/Verify Welding Specifications, keep a Weld Log and Weld Map on HDD’s and Valve Sets.
January 2015 – May 2015
Magellan Midstream Partners, L.P., Motiva to Hobby Upgrade, CPWI Welding Inspector
Pasadena, Texas
• Test Welders and provide Welder Qualification Data Report in compliance with company specifications, API
1104, WPS MAG-60-V-G,1&2.
• Visual Inspection of Mainline Welds and Tie-in Welds.
• Prepare Daily Work and Hot Work Permits.
• Coordinate with NDT, Survey and Team Members to assemble all information for the Permanent Job File.
October 2014 – January 2015
RKI Exploration & Production, LLC, Welding Inspector / Facility Civil Consultant
Casper, Wyoming
• Supervise and Inspection, Stringing, Bending, Lower-in, Tie-ins and Safety for multiple projects.
• Consultant to the Contractors and Subcontractors on the Civil and Mechanical building a Compressor Station.
September 2014 – October 2014
Crestwood Midstream LP, Bucking Horse Truck LP Facility, Senior Welding Inspector / Assistant Construction Manager
Douglas, WYyoming
• Verify Welding Procedures and Welder Compliance in the field.
• Read and interpret the mechanical and civil drawings, keep a weld log and weld map, red line drawings
• complete with heat numbers and dimensions, review MTR’s, do all visual weld inspection, coordinate with the
NDT crew and the construction crews,
• Keep daily reports, assist with all Pressure Testing and records.
• Assemble all documents for the permanent job file.
September 2013 – August 2014
Spread 2 Segment 1 & 2A, Enterprise WEP III, & Phase 2, CPWI Welding Inspector / Hydro-Test Inspector
Aztec, New Mexico
• Prepare the weld inspection reports daily. Review RT reports. Verify welding procedures and compliance in the field. Interpret contract welding specifications.
• Update welder qualifications and certification forms.
• Hydro-test of Fabrication, Valves and Main Line.
• Assist with Welder testing, qualification, and re-qualification.
July 2012 – Jan 2013
Spread 5, Oneok Bakken, Superintendent
Cheyenne, Wyoming
• Evaluate construction requirements for the project.
• Monitor compliance of welding parameters to internal as well as external regulatory requirements.
• Assemble required project construction documentation for the permanent construction file, Job-Book.
Certifications
Additional Skills
Working knowledge of all API disciplines, i.e. 510, 570. 653. NDT NDE film reading.
Aug 2019 – March 2020
McDaniel Technical Services, Inc. ARB Midstream. CPWI Lead Welding Inspector / Hydro-Test Inspector
Platteville, Colorado
Fully equipped independent R & D lab offering plastics testing, failure analysis, formulation and product development, technical marketing, and contract R & D services.
• Inspected Main-line and Tie-in Welds.
• Verified Welding Procedures and Compliance in the field.
• Interpreted Contract Welding Specifications, keep a Weld Log and Weld Map drawings of HDD’s and Valve Sets.
• Monitored Hydro Pre-Test of HDD’s and Final Mainline Hydro Test.
• Inspected Field Valve Installations.
• Prepared documentation and drawings for the Final Job Book.
Jan 2019 – Aug 2019
Cleveland Integrity Services, Rocky Mountain Midstream, Senior Welding Inspector / Williams
Brighton, Colorado
• Verified Welding Procedures and Welder Compliance in the field.
• Kept a weld log and weld map, As-build (red line) drawings on HDD’s, Valve Sets and Fabrication.
• Audit Welding NDT Reader Sheets and MTR’s.
• Tested Welders and provided Welder Qualification Data Report in compliance with company specifications.
• Prepared PHMSA documentation and drawings for the Final Job Book.
Jan 2017 – Jan 2019
Quality Check Energy Services, Discovery Midstream, CPWI Welding Inspector / Hydro-Test Inspector / Q C Coordinator
Brighton, Colorado
• Inspect Fabrication and Final Main-line Tie-in Welds.
• Verify Welding Procedures and Compliance in the field. Interpret Contract Welding Specifications, keep a weld log and weld map, red line drawings on Valve Sets and Fabrication.
• Monitor and Approve all Hydro Pre-Test of HDD’s, Fabrication and Final Main-line Hydro-Test. Inspect Field
Valve Installations.
September 2016 – December 2016
Energy Transfer Co. DAPL, Spread 3, Hydro-Test Inspector
Boone, Iowa
• Inspect and Approve all Hydro Pre-Test of HDD’s, Fabrication and Final Main-line Hydro-Test.
• Inspect all Field Valve Installations. Monitor final Tie-in Welds.
• Coordinate Survey and Final Civil Site Work.
July 2016 – August 2016
Energy Transfer Co. DAPL, Spread 1, Hydro-Test Inspector
Litchfield, Illinois
• Inspect and Monitor all HDD’s.
• Monitor and Approve all Mainline and HDD Hydro-Tests.
• Inspect and assist with Lower-in and Backfill and ROW cleanup.
February 2016 – June 2016
Magellan Midstream Partners, L.P., Fort Smith Connector, CPWI Welding Inspector / Hydro-Test Inspector
Fort Smith, Arkansas
• Inspect and Approve all Hydro Pre-Test of HDD’s, Fabrication and Final Main-line Hydro-Test.
• Inspect all Field Bending.
• Monitor Lowering-in, Tie-Ins, Back-Fill.
June 2015 – February 2016
Suncor Energy, Rocky Mountain Crude System Expansion, CPWI Welding Inspector
Ft. Lupton, Colorado
• Test Welders and provide Welder Qualification Data Report in compliance with company specifications.
• Verify Welding Procedures and Compliance in the field.
• Interpret/Verify Welding Specifications, keep a Weld Log and Weld Map on HDD’s and Valve Sets.
January 2015 – May 2015
Magellan Midstream Partners, L.P., Motiva to Hobby Upgrade, CPWI Welding Inspector
Pasadena, Texas
• Test Welders and provide Welder Qualification Data Report in compliance with company specifications, API
1104, WPS MAG-60-V-G,1&2.
• Visual Inspection of Mainline Welds and Tie-in Welds.
• Prepare Daily Work and Hot Work Permits.
• Coordinate with NDT, Survey and Team Members to assemble all information for the Permanent Job File.
October 2014 – January 2015
RKI Exploration & Production, LLC, Welding Inspector / Facility Civil Consultant
Casper, Wyoming
• Supervise and Inspection, Stringing, Bending, Lower-in, Tie-ins and Safety for multiple projects.
• Consultant to the Contractors and Subcontractors on the Civil and Mechanical building a Compressor Station.
September 2014 – October 2014
Crestwood Midstream LP, Bucking Horse Truck LP Facility, Senior Welding Inspector / Assistant Construction Manager
Douglas, WYyoming
• Verify Welding Procedures and Welder Compliance in the field.
• Read and interpret the mechanical and civil drawings, keep a weld log and weld map, red line drawings
• complete with heat numbers and dimensions, review MTR’s, do all visual weld inspection, coordinate with the
NDT crew and the construction crews,
• Keep daily reports, assist with all Pressure Testing and records.
• Assemble all documents for the permanent job file.
September 2013 – August 2014
Spread 2 Segment 1 & 2A, Enterprise WEP III, & Phase 2, CPWI Welding Inspector / Hydro-Test Inspector
Aztec, New Mexico
• Prepare the weld inspection reports daily. Review RT reports. Verify welding procedures and compliance in the field. Interpret contract welding specifications.
• Update welder qualifications and certification forms.
• Hydro-test of Fabrication, Valves and Main Line.
• Assist with Welder testing, qualification, and re-qualification.
July 2012 – Jan 2013
Spread 5, Oneok Bakken, Superintendent
Cheyenne, Wyoming
• Evaluate construction requirements for the project.
• Monitor compliance of welding parameters to internal as well as external regulatory requirements.
• Assemble required project construction documentation for the permanent construction file, Job-Book.
- Supervise daily activities and scope of work to Project Manager, Foreman and/or Inspectors
Certifications
- National Welding Inspection School, CPWI # 63764740
- Williams 1104 Certified Welding Inspector
- Competent Person, Excavation, Confined Space Entry
- OSHA 30... First Aid
- OSHA 1926 Subpart M... OQ
- API 1104, API 1107, Section IX, ASME B 31.3, ASME B 31.4, ASME B 31.8, DOT 192, DOT 195, API 5L, AWS A5.5
Additional Skills
Working knowledge of all API disciplines, i.e. 510, 570. 653. NDT NDE film reading.
- Microsoft Office, MS Excel, MS PowerPoint,
- Outlook
- Adobe Acrobat
- Blue Beam Extreme
